How to Change Lighting Options on a Hikvision ColourVu Analogue Camera

How to Change Lighting Options on a Hikvision ColourVu Analogue Camera

1. Access Live View
   Click on the camera's Live View.

2. Open PTZ Controls
   Right-click anywhere on the Live View and select PTZ Controls from the menu.

3. Access the Camera Menu (OSD Menu)

   • On the right-hand side, you’ll see a list of presets.

   • Scroll down and click on Preset 95.

   • Then, locate the Iris+ button in the PTZ control panel – it looks like a circle with etched lines around the edge.

     Note: The Iris+ button functions as the “Enter” button.

4. Navigate to 'Smart Light' Settings

   • Once the camera's on-screen display (OSD Menu) appears, use the Up and Down arrows in the PTZ controls to navigate to Smart Light.

   • Press the Iris+ button to select it.

5. Change the Lighting Mode

   • Use the Left and Right arrows to switch between the lighting options:

     • Auto – Turns on from dusk till dawn.

     • On – Light stays on continuously.

     • Off – Light remains off at all times.

       Note: When using the "Off" option, ensure there is sufficient ambient lighting (e.g., streetlight or PIR floodlight), otherwise the camera may not produce full-colour images.

6. Save Your Settings

   • Once you've selected the desired lighting mode, use the Up/Down arrows to navigate to Save & Exit.

   • Press the Iris+ button to confirm and save your changes.